3 Ways To Fix Fridge Not Cooling But Freezer Works
If your fridge isn’t cooling properly but your freezer works fine, check if the thermostat is set correctly.
It could be that the thermostat is faulty and needs replacing.
Check the wiring connections and ensure that the power supply is connected correctly.
Also check the fan motor connection and ensure that the fan is working.
If these checks fail, contact a professional refrigerator repair service
How to Fix Fridge Not Cooling But Freezer Works?
Fridge not cooling but freezer works – This problem occurs because the refrigerator does not cool down properly. It could be caused by several reasons such as a power outage, a broken fan belt, a faulty thermostat, or a bad compressor. In any case, if the fridge is not cooling down properly, it is important to check the following things: 1 Is the door closed tightly? 2 Are the vents clear and clean? 3 Have you checked the fuses? 4 Check the temperature sensor. 5 Make sure the fan is working properly. 6 Try cleaning the coils. 7 Check the air filter. 8 Clean the condenser coil. 9 Check the evaporator fan motor. 10 Check the refrigerant level. 11 Replace the cap. 12 Check the drain pan. 13 Check the drain hose. 14 Check the drain line. 15 Check the drain pump. 16 Check the drain pipe. 17 Check the drain valve. 18 Check the drain
If you have a freezer, defrosting is done automatically. It takes about 8 hours to defrost a full sized freezer. Defrosting is done by using the defrost setting. This setting is usually located on the front panel of the freezer. To turn off the defrost mode, simply press the button to stop the process.
Thermistor and Evaporator Fan
A thermistor is a resistor used to measure the temperature of a system. Thermistors are typically placed near the heating element to monitor the temperature of the element. A thermistor is a type of resistor that changes resistance according to the temperature. For example, if the temperature of the thermistor is above 100 degrees Celsius 212 degrees Fahrenheit, the thermistor becomes very hot and the resistance decreases. If the temperature drops below 100 degrees Celsius 212 degree Fahrenheit, the thermistor cools down and the resistance increases.
An evaporator fan is a fan that blows air across the coils of the refrigerator’s condenser coil. The purpose of the fan is to remove moisture from the cooling coils. The fan pulls warm moist air into the unit where it is cooled and condensed back into liquid form. The liquid is drained away from the unit and returned to the outside environment via a drain pan.
Why would refrigerator stop cooling but freezer still works?
If the refrigerator is not cooling properly, check if the compressor is running correctly. If the compressor is not running, try to restart the unit. If the problem persists, contact a professional service technician.
Why is my fridge not getting cold but my freezer is?
If you notice that your refrigerator is getting warmer than usual, check if the door is open. If it is closed, try opening it. This could help cool down the interior of the refrigerator. If the problem persists, call a professional repairman.
How do you reset a refrigerator that is not cooling?
Freezers and fridges are designed to cool down items that are placed inside them. This is done by using cold air from outside the appliance. However, if the refrigerator or freezer door is left open, warm air from inside the appliance will enter into the refrigerator or freezer. As a result, the contents inside the refrigerator or freezer will get warmer. To avoid this problem, always keep the doors closed while keeping the appliances running.
How do I fix my refrigerator that is not cooling?
Your refrigerator and freezer are designed to maintain a specific temperature range. This is called the “freezer” or “refrigerator” setting. Your freezer is set to 0 degrees Fahrenheit 32 degrees Celsius while your refrigerator is set to 40 degrees Fahrenheit 4 degrees Celsius. These temperatures are ideal for keeping food safe from bacteria growth. However, if your freezer or refrigerator gets too cold or too hot, it could damage your food.
Why is my freezer too cold and my fridge too warm?
Refrigerators are designed to cool food items down to a certain temperature. Refrigerators are generally equipped with a compressor that circulates cold air around the interior of the fridge. This process is called refrigeration. Refrigerators are usually powered by electricity. In case your refrigerator isn’t working properly, you can try these tips to get it back to normal operation.
1. Check if the power supply is turned off. Turn the switch on and check if the light turns on. If it doesn’t, turn the switch off and wait for 10 minutes. Then turn the switch on again.
2. Check if the door is closed tightly. Make sure that the door is shut completely. If it is open, close it.
Why is my freezer frosting and fridge not cooling?
Refrigerators are designed to cool items down to a certain temperature. If the fridge isn’t working properly, check the thermostat. It could be set incorrectly or the unit itself could be faulty. If the problem persists, contact a professional appliance repair service.
How do you fix a warm fridge and cold freezer?
If your refrigerator is not getting cold, it could mean that the thermostat is malfunctioning. This can happen if the thermostat is set to “cool” instead of “off”. To fix this problem, turn off the power switch and unplug the appliance from the wall outlet. Then, open the door and remove the back panel. Next, locate the thermostat and reset it to “off” if possible. Afterward, replace the back panel and plug the unit back into the wall. Finally, turn the power switch back on and test the refrigerator again. If the problem persists, contact a professional service technician.
How do you fix a refrigerator that is not cooling freezer is working?
If the compressor stops working, the fridge will not cool down. It could be because of many reasons such as power failure, bad wiring, faulty fan motor, blocked air vents, broken thermostat, damaged evaporator coil, faulty compressor, or even a leaky condenser unit. To check if the problem is caused by a malfunctioning compressor, turn off the power switch and wait for 10 minutes. If the compressor does not restart after waiting for 10 minutes, call a professional repair service immediately.