Have you ever tried to cook something in your Instant Pot, only to realize that it won’t turn on?
If yes, then you’ve probably experienced this problem before.
The issue usually occurs due to a faulty heating element or a bad connection between the pot and its lid.
Instant Pot is a pressure cooker that allows you to cook food at high temperatures without using oil or gas.
This makes it ideal for busy families who want to eat healthier meals.
However, sometimes, even after cleaning the pot thoroughly, the cooking function won’t work.
In this case, you’ll need to replace the heating element.
Here’s how to fix the problem
My Instant Pot Won’t Turn On. WHY?
If you have tried everything but still cannot get your Instant Pot to turn on, here are three reasons why it won’t turn on: 1. Make sure the power cord is plugged into a working outlet. 2. Make sure the power switch is turned on. 3. Make sure the lid is properly sealed.
Most common reasons why your Instant Pot Won’t Turn On
1. Make sure the power cable is plugged into a working socket. 2. Make sure power switch is turned on 3. Make sure the lids are properly sealed.
1. Bad power connection problem
If the power cord is not connected correctly, the power button won’t turn on. It could be because the plug is loose or the wire is damaged. To check if the power cord is plugged in correctly, try pressing the power button again. If the power button still doesn’t turn on, unplug the power cord from the wall outlet and reattach it using the correct plug.
2. Power switch is off
3. Lid is not properly closed
2. No power at all or power outage
1. Bad power connection problem – If the power cord is not attached correctly, the power button will not turn on. It could mean that the plug is loose or that the wire is damaged. Try pressing the power button again to see if it turns on. If it does not turn on, unplug it from the wall outlet and reconnect it using the correct plug the one that fits into the socket.
2. Power switch off – If the power switch is turned off, the power cord needs to be disconnected from the wall outlet. Turn the power switch back on.
3. Lid not properly closed – Make sure the lid is fully closed. If it isn’t, press down firmly until it closes completely.
3. Your Instant Pot’s electrical fuse has been blown off
If the power light flashes red and the display says “LOW BATTERY”, the fuse has blown. This usually happens because the battery is low or the circuit board is faulty. To replace the fuse, remove the bottom plate lid of the Instant Pot. Remove the screws holding the bottom plate to the base. Remove the two metal clips that hold the fuse box in place. Slide the fuse box out of the Instant Pot. Replace the fuse box with a new one. Screw the bottom plate back onto the base. Put the lid back on the Instant Pot. Press the power button to turn the unit on.
4. Low voltage warning message appears
Answer: This error message indicates that the voltage level is below the minimum required to operate the unit. Check the wiring connections and ensure that the power cable is connected properly. Also check the fuses and reset the unit if necessary.
1 Make sure the power cord is plugged into a working outlet. 2 Reset the unit by pressing the buttons on the front panel until the unit turns off. 3 Check the fuses and reset if needed. 4 Disconnect the power cord from the wall socket and reconnect it after 5 minutes.
5. Slow heating or slow cooling
Answer: Slow heating or slow cooling occurs when the unit does not heat or cool quickly enough. It could be caused by a malfunctioning thermostat or a defective fan motor.
Here are the possible solutions to your Instant Pot issues
If you are having problems with your Instant Pot, here are some possible solutions: 1 Make sure the power cord was plugged into a working outlet if you are using a portable model. 2 Reset the unit by pressing buttons on the front panel. 3 Check the fuses and replace if needed. 4 Disconnect the power cord and reconnect it after five minutes. 5 Slow heating or slow cooling occurs if the unit does not heat up or cool down fast enough. This problem usually happens because the thermostat is faulty or the fan motor is bad. Here are the possible solutions to fix these problems: 1 Replace the thermostat. 2 Clean the fan motor. 3 Change the filter.
Inspect Your Power Cord
1 Make sure the power cord is plugged into a working outlet.
2 Reset the unit by pressing the buttons on the front panel see picture.
Double-Check Your Power Outlet
If you notice any signs of damage, such as frayed wires or loose connections, contact the manufacturer immediately.
Contact Instant Pot Customer Care
Instant Pot Customer Care Number 1-800-869-2046
How do you fix an Instant Pot that won’t turn on?
If you turn on your Instant Pot and nothing happens, chances are you have a problem with your power supply. Make sure the outlet where your Instant Pot plugs into is working properly. Also, check if the cord is plugged in correctly. If the power supply is working fine but still no light comes on, try unplugging the unit from the wall socket and plugging it back in again. If the light doesn’t come on after doing this, you’ll know that the problem lies somewhere else.
Why is my pressure cooker not working?
Yes, there is a reset button on the Instant Pot. It is located on the front panel of the unit. Pressing the button will clear any error messages that may occur while using the unit.
How do I know if my Instant Pot fuse is blown?
Instant Pot has a thermal fuse to prevent overheating. This is a safety feature to protect the user from burns. It is located near the venting hole on the top of the unit.
Is there a fuse in the Instant Pot?
Yes, there is a fuse in the Instant pot. It is located under the lid. If you see a red light flashing, it indicates that the fuse is blown. This could mean that the power supply is damaged. To fix this problem, remove the lid and check if the fuse is working properly. If not, replace the fuse.
What thermal fuse is in Instant Pot?
If you notice any of these symptoms, it could mean that your fuse is blown.
1 Your Instant Pot won’t turn on.
2 It takes longer than usual to heat up.
If your pressure cooker isn’t working properly, check if the following things are done correctly: 1 Make sure that the pressure regulator is connected to the stove. 2 Check if the safety lock is turned off. 3 Make sure that the lid is tightly closed. 4 Make sure that the vent pipe is open. 5 Make sure that the burner is turned on. 6 Make sure that the flame is adjusted to medium. 7 Make sure that the gas supply line is connected to the stove and the gas is turned on. 8 Make sure that the cooker is placed on a stable surface. 9 Make sure that the handle is firmly attached to the cooker. 10 Make sure that the knob is turned clockwise. 11 Make sure that the safety switch is turned on. 12 Make sure that the oven door is shut. 13 Make sure that the window is open. 14 Make sure that
Why is my Instant Pot not turning on?
If your pressure cooker doesn’t seem to be working properly, check the following troubleshooting tips: 1 Make sure the power cord is plugged into the wall outlet correctly. 2 Check if the power switch is turned on. 3 Ensure that the power button is pressed down firmly. 4 Turn off the power supply to the unit. 5 Press the reset button located near the front panel. 6 Try turning the unit upside down and pressing the reset button again. 7 Reset the unit to factory defaults. 8 Clean the vent holes and the heating element. 9 Remove the inner pot and clean the bottom of the inner pot. 10 Replace the inner pot. 11 Close the lid and press the start button. 12 Wait for the indicator light to go off. 13 Reattach the inner pot. 14 Press the start button. 15 Wait for the indicator lights to go off. 16 Open the lid. 17 Press