3 Common Cuckoo Rice Cooker Problems With Solutions

Cuckoo rice cooker is a very useful kitchen appliance.
It saves time and energy.
But sometimes, it fails to cook the food properly.
What causes these problems?
And what solutions are there?

Cuckoo rice cookers are designed to cook rice automatically without human intervention.
They are also known as automatic rice cookers or self-cooking rice cookers.
The basic idea behind them is to heat water in a pan and then pour it into a bowl containing uncooked rice.
As soon as the water reaches the boiling point, the rice starts cooking.

Here are 3 common cuckoo rice cooker problems with their solutions

Cuckoo Rice Cooker Problems

If you are having problems with your cuckoo rice cooker, here are three common problems and solutions.
1. Water Leaks
Sticky Rice
3. Overcooked Rice

1) Lid not Opening up

First check if the lid is properly closed. If it is not, try to open it manually. If it still does not open, try to press down on the handle. If it still doesn’t open, please contact us immediately.
2 Rice stuck to the bottom of the pot
Answer: Please clean the pot thoroughly. Make sure the rice is completely dry. Then, put the pot back into the rice cooker. Press the “start” button. Wait until the rice cooker finishes cooking. Open the lid carefully. Remove the cooked rice from the pot. Put it onto a plate. Let it cool down. After cooling down, remove the sticky rice from the bottom of the pot using a spoon. Clean the pot again. Repeat the above steps until no sticky rice is left.


Please clean the pot thoroughly.Make sure the rice is completely dried.Then,put the pot back into therice cooker.Press the “start”button.Wait untilthe rice cookerfinishes cooking.Open the lidcarefully.Remove thecooked ricefrom thepot.Put itonto aplate.Let itcooldown.After coolingdown,remove thesticky ricefrom thebottomof the potusinga spoon.Clean the potagain.Repeat theabove stepsuntilno sticky riceisleft.

2) Gasket Problem

If the gasket is not properly installed, the lid won’t stay closed tightly. This could lead to overheating and possible damage to the rice cooker. Make sure the gasket is placed correctly and firmly in place.
3 Rice Not Cooking Properly
Answer: It’s very likely that the rice isn’t cooked properly. Try
using a different brand of rice. It may take longer to cook but it’ll be perfect.

3) Not Working

Make sure the power cord is plugged into the wall socket. Also check if the switch is turned off.
4 Overheated
: Check if the heating element is damaged. If it’s still hot, turn off the power supply and wait for 10 minutes. Then try again.


If the heating element is not working properly, replace it.
5 Water Leaks
Answer: Check if the drain pipe is clogged. If it’s clogged, unplug the appliance and remove the plug from the drain pipe. Turn the tap on and let the water run until the leak stops. After that, clean the drain pipe using a brush or sponge.

How do I reset my rice cooker?

Rice cookers are not meant to steam. It is designed to cook dry rice. In case you wish to steam rice, you can use a steamer.

How do I clean and sanitize my rice cooker?

Rice cookers are very easy to operate. But if you encounter any problems while using it, here are some tips to help you fix it.
1. Check the power supply. Make sure that the power cord is plugged into the wall socket correctly. Also check whether the power switch is turned off.
2. Check the heating element. Turn off the power supply and remove the outer casing. Look for cracks or damage to the heating element. Replace the heating element if necessary.

Why is my rice cooker not steaming?

Cuchen rice cooker is a very popular brand of rice cooker. It is easy to operate and user friendly. However, sometimes it gets stuck and does not respond to any button press. In such cases, you need to reset the cucchen rice cooker manually. To reset the cucchen rice, follow these steps: 1 Turn off the power supply 2 Remove the outer casing 3 Press the reset button 4 Replace the casing 5 Turn on the power supply 6 Wait for about 10 minutes 7 Reheat the rice cooker 8 Enjoy your delicious cooked rice!

Why did my rice cooker stop working?

Steam rice cookers have vents that allow steam to escape from the inner chamber during cooking. These vents are usually located near the top of the cooker. Cleaning these vents is very important because if not cleaned properly, they could cause damage to the cooker. To clean the vents, remove the outer casing of the cooker and wash it thoroughly under running water. Make sure to rinse the vents well after washing. Once the vents are clean, replace the outer casing and tighten it tightly.

How do you clean a steam rice cooker vent?

Rice cookers are very sensitive devices. It is not uncommon for rice cookers to break down after years of service. This happens because of many reasons such as poor quality parts, improper maintenance, and lack of proper care.
If your rice cooker is still under warranty, take it back to the manufacturer. If it is no longer under warranty, contact a repair shop.

How do you reset a Cuchen rice cooker?

Rice has a large amount of starches. When you start to warm your rice cooker in an electric gadget, the warmth inside the machine starts to raise the temperature and the water begins to boil inside the container.
When the boiled water combines with the starch in the grains, it starts to produce bubbles and these bubbles expand past the capacity of the cooker.
The bubbles appear to become huge and foam and it expands as it feels the rise in temp and this is the reason why rice cooker does not steam.

How do you troubleshoot a rice cooker?

Rice cookers are very easy to clean. Just follow these steps: 1 Remove the inner pot from the outer pot. 2 Wash the inner pot thoroughly using hot water and soap. 3 Rinse the inner pot with cold water. 4 Dry the inner pot thoroughly. 5 Put the inner pot back into the outer pot. 6 Close the lid tightly. 7 Turn off the power switch. 8 Wait until the inner pot cools down completely. 9 Open the lid carefully. 10 Clean the outside of the outer pot. 11 Wipe the inside of the outer pot. 12 Replace the inner pot into the outer pot. 13 Close the lid tightly again. 14 Turn on the power switch. 15 Wait until the inner and outer pots warm up. 16 Check if the inner pot is clean. 17 Repeat Steps 1-16 until the inner pot is clean enough. 18 After cleaning, rinse the inner pot with hot water

Are rice cookers supposed to steam?

Rice cooker is a very useful appliance. It helps us to cook our favorite dishes easily. But sometimes we face problems while using it. So here we are providing you some easy steps to solve these issues. First thing is to turn off the power supply. Then remove the plug from the socket. Now press and hold the button for about 10 seconds. After that release the button and wait for 5 minutes. After that connect the plug again and switch on the power supply. Your rice cooker will be working fine now.

Similar Posts